GNS3 Lab Files, System and Networking: Using OSPF special areas, authenication and virtual link

Sunday, February 6, 2011

Using OSPF special areas, authenication and virtual link

This lab will show you all in one about OSPF special areas, authentication between each routers and configuration of OSPF virtual link.

As the original lab is from CBT Nuggets and as it covered many topic, this lab is using eight routers :)

All configuration are exactly same as from CBT Nuggets video. For those who have video and don't have GNS3 files, download from below link.

https://docs.google.com/leaf?id=0B889ogd4ltI2MDQ2OTMyYjItZDEwYy00ZWY4LTk5OGMtNmQ3ZWI0NTVlZDBi&hl=en&authkey=CJ-w4LgI

2 comments:

AnonymousAugust 8, 2011 at 1:44 AM
Txh a lot !!! But ^^^It will be perfect if you will share the initial configuration and final config. Anyways, great job!
ReplyDelete
Replies
Myo GyiAugust 10, 2011 at 8:43 PM
Hi,
Yes, :)..Thanks. I'll upload both in my next posts. Next upload will come with some of the my switching preparing exams.
ReplyDelete
Replies

Add comment

Why I create this blog?

I have search GNS3 lab files in Internet not only for preparing my certification exams but also for interest in Cisco.

But, sometime, it's difficult to get the one you want. Some lab files are very good but using too much routers which can have problem when opening and running.

That's why I created simple GNS3 files even though I'm not guru in networking.

All comments are welcome by sharing knowledge in networking.

If there is any error in my lab files, this is my lack of knowledge.

Recently, I have changed my mind to post not only GNS3 lab files but also to add other system and networking experiences as well.